BGEN

Смазочни продукти

Addinol


Специални продукти

ИмеТехническо описаниеОпаковкиpdf
ADDINOL CYLINDER OIL Z 1000, Z 1500ADDINOL Cylinder oils Z 1000 and Z 1500 are highly viscous mineral oils with a good adhesive and lubricating power.
SPECIFICATION/APPROVALS
Meets the requirements of lubricating oils Z
according to:
• Type ZB for ADDINOL Cylinder oil Z 1000
• Type ZD for ADDINOL Cylinder oil Z 1500
208 литра
ADDINOL TEXTILE MACHINE OIL 22 T, 32 TADDINOL Textile machine oils T are semi-
synthetic industrial oils on the basis of selected mineral oil raffinates and specific ester components. Special additives ensure a good wear protection for components of knitting machinery. These products quickly emulsify with water and washing solutions
generally used in textile industry and thus they guarantee a good washing-out effect of the oil from textiles.
SPECIFICATION
Meets and surpasses the requirements of:
• DIN 62136-1
208 литра
ADDINOL DRAWING LUBE 35Drawing Lube 35 is a soft, water-soluble drawing paste free of mineral oil. It does not contain any chlorine or sulphur compounds nor complexing agents.25 кг
ADDINOL TRANSFORMER OIL TRF-GNXADDINOL Transformer Oil TRF-GNX is a mineral oil raffinate based on naphthenic crude oils with an additional anti-ageing additive.
APPLICATION
Excellent suitability as insulating and cooling fluid in transformers, chokes, converters, switches and similar high voltage devices.
SPECIFICATIONS/APPROVALS
Meets and surpasses the requirements of:
• IEC 60296 (2003)
• DIN 57370-1 / VDE 0370-1 class A (valid
until 01.04.2007)
• DIN EN 60296, VDE 0370-1 (valid from January 2005)
208 литра
ADDINOL TRANSFORMER OIL TRF-HXADDINOL Transformer Oil TRF-HX is a high-quality mineral oil raffinate of specially hydrated paraffin based oil and an anti-ageing
additive.
APPLICATION
Excellent suitability as insulating and cooling fluid in transformers, chokes, converters, switches and similar high voltage devices,
which work under high thermal loads.
SPECIFICATIONS/APPROVALS
Meets and surpasses the requirements of the
following specifications:
• DIN EN 60296 (2003)
• DIN 57370-1 / VDE 0370-1, Class A (valid until 04/01/2007)
• DIN EN 60296 / VDE 0370, part 1 (valid from January 2005)
208 литра
ADDINOL MOULD RELEASE OIL F 10, F 68MOULD RELEASE OILS
ADDINOL Mould release oils F 10 and F 68 are based on special mineral oil raffinates which contain rust inhibiting and separating
agents. They form a chemical-physical separating film which prevents the adhesion between formwork and concrete.
208 литра
ADDINOL MOULD RELEASE OIL F 135, F 150 NADDINOL Mould Release Oil F 135 and F 150 N are special mineral oil raffinates of higher viscosity. They contain additives with separating effect as well as additives with good corrosion protection.
APPROVALS / RECOMMENDATIONS
ADDINOL Mould Release Oil F 135 is
recommended by: • Masa-Henke
• Wehrhahn • Hess AAC Systems
208 литра
ADDINOL MOULD RELEASE OIL F 145ADDINOL Mould Release Oil F 145 is a separating agent based on special paraffinic mineral oil raffinates of high viscosity. The product contains additives with separating effect as well as additives providing good corrosion protection.
RECOMMENDATIONS
ADDINOL Mould Release Oil F 145 meets
and surpasses the requirements of:
• Masa-Henke • Wehrhahn • Hess AAC Systems
208 литра
ADDINOL ECOPLUS XT UADDINOL Ecoplus XT U is a quickly biodegradable release emulsion based on vegetable oil with outstanding performance
characteristics.
SPECIFICATIONS
Biodegradability according to:
• OECD 301 D (> 90%)
1000 литра контейнер