BGEN

Смазочни продукти

Shell Lubricants


Смазочни продукти за авиацията

ИмеТехническо описаниеОпаковкиpdf
Aeroshell Fluid 41AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness, and possesses improved fluid properties. AeroShell Fluid 41 contains additives which provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation - corrosion inhibition and shear stability. In addition metal de-activators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic
applications. AeroShell Fluid 41 is capable of wide temperature range operation.
AeroShell Fluid 41 is dyed red.
Aeroshell Fluid 31AeroShell Fluid 31 is a synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products. AeroShell Fluid 31 has a specially designed base stock which imparts a relatively high flash point, excellent low
temperature properties and good oxidation and thermal stability. In addition, AeroShell Fluid 31 is formulated with high technology additives to provide oxidation and corrosion resistance, antiwear, and anti-foaming protection. AeroShell Fluid 31 is superclean filtered to ensure optimum performance in particulate monitored systems. AeroShell Fluid 31 is dyed red. The useful operating temperature range is –40 to +205°C.
Aeroshell Fluid 4AeroShell Fluid 4 is a mineral hydraulic oil with very good low temperature characteristics and capable of operating
over a wide temperature range. AeroShell Fluid 4 is composed of a mineral oil base stock and a complex additive package which results in a product with excellent low temperature flow and anti-wear properties, exceptional antifoam characteristics, and excellent oxidation stability. AeroShell Fluid 4 is dyed red.
Aeroshell Fluid 12AeroShell Fluid 12 is a low volatility synthetic ester oil used in aircraft instruments and also for the general lubrication of aircraft. It is oxidation and corrosion inhibited, and possesses good high and low temperature characteristics.
Aeroshell Grease 14AeroShell Grease 14 is a helicopter multi-purpose grease composed of a mineral oil thickened with a calcium soap, possessing outstanding anti-fret and anti-moisture corrosion properties. It is oxidation and corrosion inhibited. The useful operating temperature range is –54°C to +93°C.
Aeroshell Grease 22AeroShell Grease 22 is a versatile advanced general purpose grease composed of a synthetic hydrocarbon oil thickened with Microgel®, with outstanding performance characteristics. Appropriate additives are included to achieve the necessary oxidation and corrosion resistance, anti-wear properties and load carrying properties.
The useful operating temperature range is –65°C to +204°C.
Aeroshell Grease 33AeroShell Grease 33 is a synthetic universal airframe grease composed of a lithium complex thickened synthetic base oil with corrosion and oxidation inhibitors and load carrying additives. The useful operating temperature range is –73°C to +121°C.
Aeroshell Grease 33MSAeroShell Grease 33MS comprises AeroShell Grease 33 fortified with 5% molybdenum
disulphide. It possesses the enhanced anti-
wear and anti-corrosion properties of AeroShell Grease 33 with the added EP (Extreme Pressure) properties provided by the addition of a solid lubricant. The useful operating temperature range is –73°C to
+121°C.
Aeroshell Grease 5AeroShell Grease 5 is a high temperature grease composed of a mineral oil thickened with Microgel®, possessing good load-
carrying ability. It is inhibited against oxidation and corrosion and has excellent resistance to water. The useful operating temperature range is –23°C to +177°C.
Aeroshell Grease 6AeroShell Grease 6 is a general purpose grease composed of a mineral oil thickened with Microgel®, possessing good all-round properties within a limited range. It is inhibited against oxidation and corrosion and has good water resistance and low noise capability. The useful operating temperature range is –40°C to +121°C.
Aeroshell Grease 7AeroShell Grease 7 is an advanced multi-purpose grease, composed of a synthetic oil thickened with Microgel®, possessing good load carrying ability over a wide temperature range. It is inhibited against corrosion and hasexcellent resistance to water. The useful operating temperature range is –73°C to +149°C.
Aeroshell oil 100AeroShell straight mineral oils are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (which is added when improved fluidity at very low temperature is required) and an anti-oxidant.
Aeroshell oil 120The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification
SAE J-1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so
operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.
Aeroshell oil 65The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification
SAE J-1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so
operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.
Aeroshell oil 80The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification
SAE J-1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so
operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.
Aeroshell oil W 15W-50AeroShell Oil W 15W-50 is a unique blend of high quality mineral oil and over 50% synthetic hydrocarbon base stocks, plus the AeroShell Oil W ashless dispersant additive system. This semi-synthetic blend offers high performance in a wide variety of applications and conditions.
Aeroshell Turbine oil 2AeroShell Turbine Oil 2 is a 2 mm?/s mineral turbine oil blended from mineral base stocks to which a pour-point depressant and an anti-oxidant have been added.
Aeroshell Turbine oil 500AeroShell Turbine Oil 500 is a 5 mm 2/s synthetic hindered ester oil incorporating a carefully selected and balanced combination of additives to improve thermal and oxidation stability and metal passivation.
Aeroshell Turbine oil 555AeroShell Turbine Oil 555 is an advanced 5 mm?/s synthetic hindered ester oil incorporating a finely balanced blend
of additives to improve thermal and oxidation stability and to increase the load carrying ability of the base oil.
Aeroshell Turbine oil 560AeroShell Turbine Oil 560 is a third generation, high performance, low coking 5mm 2/s synthetic hindered ester oil
incorporating a carefully selected and finely balanced combination of additives to improve thermal and oxidation stability.
Aeroshell Turbine oil Sport Plus 4Developed in conjunction with ROTAX®, AeroShell Oil Sport Plus 4 is the first oil specifically developed for light sport
aviation piston engines such as the ROTAX® 912 & 914 series. A combination of low cylinder head temperature (compared with air cooled engines), low oil consumption and the engine internals requires a blend of high quality hydrocarbon base stocks, incorporating synthetic technology which allows full performance with different fuel types. This oil can be used in all climates.